|
PRM Summit Front
Bumper and Desert Style Grab Bar
It was time to get some
protection for our new 450R. We called up our friends at PRM and got
them to send us their Summit front bumper and their Desert Style grab
bar. PRM is known for having some really strong products that can take
the types of beatings that we at MUDandDIRT put our quads through.
After looking and testing some of the other bumpers on the
market we found that most did not have enough places to grab the bike to
pull it out of the ruts and sometimes out of the trees. This is a common
problem during an XC race. PRM had what we were looking for plus had the
quality to hold up to the occasional run it with a tree.
The install went pretty smooth. There were a few delays
with the front bumper. The holes were not drilled exactly right. You
could see the punch mark and the hole wasn’t drilled exactly center
but nothing a file didn’t handle rather quickly. Other than this there
was nothing else that caused a snag with the install. The grab bar went
on as easy as the stock one was removed. There was even a little built
in cable holder for the cable running to the brake light, which we
thought, was a sign of great quality.
We are very pleased with the PRM bumpers. We have had our
450R in the ruts and in the trees and never had a problem with pulling
the bike out.
On
a Side Note
We knew PRM products were
tough but we never dreamed they were this tough! During one of our test
rides we put the front PRM bumper to the extreme test. Our rider was
riding down a fire road in 4th gear and encountered an
unexpected whoop. The bike bucked the rear end up on the front wheels
and by the time he regained control it hit another one and it threw the
rider into some trees. This was some thick stuff way to thick to walk
through. The bike broke about 3 trees with the front bumper about the
diameter of your fist balled up. The rider came over the handlebars and
cracked his helmet on some more trees. The only damage done to the bike
was a broken front fender where it rolled into the ground! “I have
never hit anything this hard and there is not a even a scratch or a dent
on anything PRM!” Nobody at the track could believe it.
The rider (Brandon) was fine and will make a full recovery
with a new helmet and some better riding boots. MaD |